Frequently Asked Questions
It is very simple to install your cell phone signal booster.
1. Have the external antenna placed high in the building until a high signal bar of 5 is reached.
2. On the external antenna, locate the port that is labeled as BTS and fix the cable.
3. Have the whip antenna on the USER port and this makes your repeater ready for use. You can switch and observe the results.
4. Keep moving the external antenna to different locations until the desired 5 bar is attained.
Instances where the signals falls to zero are certainly some of the worst times you can experience. You get denied access to internet or making any call. Cell phone repeaters products are ideal for boosting your signals to 5 bars. The 3G components also get a big shot from the cell phone repeaters. The speed is greatly increased as well as the area under coverage. Dead zones are however not supported by the cell signal boosters. For them to work, there should be a t least a slight signal.
The signals are some of the many things that require ease of operation. Many buildings suffer from lack low signal strength. This may be attributed to the distance from the signal boosters. However, some signals find it hard to penetrate through the walls. Windows may also be designed or made of materials that hinder them from penetrating into the rooms.
Dead zones are some of the areas that you will like to eliminate completely from your premises or offices. Dropped calls are also unnecessary and can be avoided by use of signal boosters. Batteries also get used up quickly in places with no signals this problem can be reduced by signal boosters. A signal booster also increases your coverage area.
The two terms have similar meaning with cell phone repeater being a jargon for the industry. They are generally devices that are used to improve the signal strength of your cell phone. They however require the support of the cell phone frequencies.